Taking the Right Steps to Sand Your Walls


Sanding is yet another important setup before you begin painting. After you’ve filled your walls up for cracks, marks, and holes, you can start sanding your wall. This will help you get a clean and smooth surface for your fresh coat of paint. It’s a necessary process to ensure that the paint goes on evenly so you get a nice and crispy job. The better you sand your wall, the easier it is to paint. There are a few key sanding tips that can help you get your wall ready for paint. We will talk about a few in a bit as you learn the right steps to sand your walls.

Make Sure You Take the Right Safety Precautions

Safety is huge with sanding. For some people, they might be allergic to some of the dust that comes off the wall. In that case, it may be in your best interest to hire someone else to do this portion. You never know what can lay in drywall after it’s seeped through for years. One thing you’ll need is protective goggles. Drywall can easily get into your eyes and cause tons of discomfort. This is not fun to get out of your eyes and sometimes it causes damage to your vision. Another thing you need is a mask to protect your face. You not only want to protect your skin, but it’s a good prevention method to avoid inhaling toxic fumes. Be very cautious to take the right steps to prevent injury and sickness before you begin to sand your walls.

Using a Sand Block with a Pole to Help You Reach High Places

If you find that you really need to smoothen out everything, you can use a sand block with a pole. This is the perfect item to help you sand high or large surfaces on the wall. Only use this when you see the need to fine tune your wall before painting. The sand pole actually comes installed or you can put it together with the sand block. If you’re short in stature, this helps to widen the gap in order to get to those hard reaching places easier. Cover more ground and continue to make smooth strokes on the wall to help you even out the drywall.

Two Key Elements to Sand Your  Wall 

For a more minor sanding job, you can do this one of two ways. Wet sanding is a popular method you can use by taking a sponge or wet rag to cover the compound filling. This is the perfect method to cover an area that was recently treated. Fine grit sandpaper by the sheet or case is helpful to apply sand sponge. Either method is great for helping you get rid of the blemishes. Just a reminder, you use the sandblock to cover more ground and higher surfaces. The sand sponge and wet sanding method makes it easier and smoother to go over the smaller blemishes. By sanding your wall, you’ll help create a smooth canvas for painting your wall.